LED Lighting Tax Aspects of Furniture Chains
The 2008 collapse of the U.S. housing market had a particularly damaging effect on the domestic furniture industry. A virtual freeze on new and existing home purchases resulted in a drastic decline in sales for furniture chains who, prior to the collapse, dominated the industry chiefly by selling foreign-made furniture. The furniture industry has largely evolved into an import form where huge warehouses store the furniture that is then sold in retail show rooms. Some major brands use large, warehouse-like structures as their retail facilities. As the economy continues to enhance, these companies will be able to realize meaningful energy cost savings and very large EPAct tax deductions by installing LED lighting in their showrooms along with energy-efficient lighting and heaters in their dispensing centers.
Large store showrooms looking to showcase their furniture can use LEDs for focused lighting, while huge warehouses that keep up the furniture before it reaches retail storefronts can realize tremendous operating cost reductions by installing LEDs or other energy-efficient lighting. While each of these building types involves a definite planning course of action with different tax implications, LED lighting can excursion large tax deductions for all furniture chain facilities.
The Section 179D EPAct Tax Opportunities
Pursuant to Energy Policy Act (EPAct) Section 179D, furniture chains making qualifying energy-reducing investments in their new or existing locations can get immediate tax deductions of up to $1.80 per square foot.
If the building project doesnt qualify for the largest EPAct $1.80 per square foot immediate tax deduction, there are tax deductions of up to $0.60 per square foot for the three major building subsystems: lighting, HVAC (heating, ventilating, and air conditioning), and the building envelope. The building envelope is every item on the buildings exterior perimeter that touches the outside world including roof, walls, insulation, doors, windows and foundation.
different Energy Tax Credits and Grants
Pursuant to the American Recovery and Reinvestment Act of 2009, there are multiple 30% or 10% tax credits obtainable for a variety of different energy measures with varying credit termination dates. For example, the 30% solar tax credit and the 10% geothermal heat pump tax credit expire January 1, 2017.
All different measures that are eligible for the 30% and 10% tax credits are also eligible for equal cash grants for the three years staring January 1, 2009 and ending December 31, 2011.
rare 2011 Opportunity: Enhanced Bonus Tax Depreciation
Solar P.V. and geothermal systems are ordinarily eligible for 5-year MACRS depreciation, but building owners who install these systems after September 8, 2010 by December 31, 2011 can take 100% depreciation tax bonus closest. already if building owners miss this 2011 window, they can enjoy a 50% tax depreciation bonus on equipment placed in service from January 1, 2012 by December 31, 2012.
The Tax Planning Implications for Furniture Chains
Showrooms and EPAct 179D
LED lighting is excellent for presenting furniture because it provides a high-powered, focused beam ideally suited for showroom floors. The shopper is naturally drawn to the furniture because of the LEDs spotlighting effect. For this reason, the Ashley Furniture showroom in Boca Raton, Florida has opened one of the first furniture stores seeking LEED certification for its inclusion of, among other things, LED lighting. Since this store is nearly 100,000 sq. ft. large, it will be eligible for up to $60,000 in tax deductions for lighting alone, and potentially greater EPAct deductions for qualifying HVAC equipment and building envelope measures. Indeed, as part of its plan to seek LEED certification, Ashley installed high-performing, low-emitting glass with automatic shades that conserve energy and rooftop solar tubes at its Boca site. A qualified specialized can transform Ashleys required LEED energy form into an EPAct tax form.
Warehouse Lighting and EPAct 179D
Building lighting comprises a large part of furniture warehouse energy use. Most warehouses that have not had a lighting upgrade to energy-efficient lighting in the last 7 or 8 years use earlier generation metal halide or T-12 fluorescent lighting. It is important to realize that effective January 1, 2009, most probe-start metal halide lighting may no longer be manufactured or imported into the United States and, effective July 1, 2010, most T-12 lighting may no longer be manufactured or imported into the United States. This method that warehouses that nevertheless have older lighting technology will soon be, or already are, unprotected to large price increases for substitute lamps and bulbs.
This earlier generation T-12 and metal halide lighting is energy-inefficient compared to todays T-8 and T-5 lighting, and a lighting retrofit can easily cut lighting electricity costs by 40 to 60 percent. In addition to large energy cost reductions from upgrading basic building lighting, most warehouses undergoing lighting retrofits install sensors that completely shut off lighting in portions of the warehouse that are not in use. before, many warehouse owners and lighting specialists were reluctant to install sensors because they reduced fluorescent lamp useful life. Today, with improved technology, sensors are obtainable with warranties that protect against reduction in lamp useful life. In the furniture warehouse business, sensors will prove particularly useful because warehouses only need intermittent illumination. Combined with fluorescent, induction or, increasingly, LED lighting, sensors are a vital consideration to any furniture warehouse operator.
Warehouse Heating and EPAct 179D
New, improved commercial heating systems can give energy cost savings of 8 percent or more over the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 2001 building code standards. There are multiple heater technologies appropriate for the furniture warehouse market, including Cambridge direct fired gas heaters, unit heaters, and infrared (e.g. radiant) heaters. If it can be done, the warehouse heater could mount on an exterior wall to optimize the roof top space for a solar P.V. roof top system.
Typical Large Furniture Warehouses acquire Large Tax Deductions
Many large warehouses have made the investments necessary to get the complete $1.80 per square foot EPAct tax deduction. Since the EPAct tax deductions relate to square footage, a 500,000 square foot furniture warehouse can obtain a $900,000 EPAct tax deduction.
IKEAs Pioneering Solar Projects
IKEA uses large integrated warehouse/retail facilities to directly sell furniture. The Swedish company has recently announced that it will install solar P.V. in some of its stores in Colorado, Massachusetts, and New Jersey. By taking advantage of its enormous, flat rooftops on its facilities, IKEA will be able to generate enough kilowatt-hours to strength its own stores lighting and HVAC needs with energy left over to sell to utilities. Further, they are making the ideal use of their solar investment by installing highly energy-efficient geothermal heating systems and LED lighting. Geothermal typically generates large EPAct 179D tax deductions, especially when coupled with LED lighting. As noted above, the geothermal system will also be eligible for a 10% tax credit or grant and very popular tax deprecation.
The New York Market
New York City has experienced a quicker economic recovery than the rest of the country, and furniture chains are acting now to try to capitalize on the citys momentum. Cleveland-based Arhaus Furniture; Nadeau Corp., a West Coast-based seller of eclectic furnishings; and discounter Home Goods, a division within TJX, are all newcomers to the NYC scene and each is hoping to take advantage of the heightened need than has often forced homeowners and renters into the suburbs to shop for their furniture. With the opening of 20,000 to 40,000 square foot retail centers, these companies have the opportunity to use LED lighting, and, in some locations, solar P.V., in their building design to excursion down their operating expenses while employing large tax incentives.
Furniture Warehouse Tax Incentivized Energy-Efficient Design course of action Steps
1. Assemble team including warehouse experts for EPAct tax incentives, utility rebates, lighting, heater, building envelope and solar energy.
2. See if roof is compatible for solar and heater. acquire proposals for installations of solar installations and any other needed roof/insulation projects and any other needed roof/insulation projects.
3. acquire lighting design that replaces all inefficient lighting. Compare and contrast costs of fluorescent, induction and LED lighting alternatives.
4. acquire Cambridge heater or different heater proposals, taking into account possible roof designs.
5. Determine utility rebate based on all hypothesizedv separate and joined energy-efficient measures. Efficient lighting will cut electric use. Roof, insulation and heater will cut therms.
6. Determine tax incentives including EPAct Section 179D tax deduction assistance and solar credit tax deductions. EPAct is based on total project square footage, including mezzanines and pick and pack modules. The 30-percent solar tax credit is based on the total solar material and installation costs.
7. Prepare project proposal detailing project costs, energy savings, utility rebates and tax incentives.
8. Get project approved by building owner.
9. Hire contractors and execute project.
10. Have EPAct tax expert prepare form and tax documentation using IRS approved software.
11. course of action utility rebates.
12. Reduce federal and state estimated tax payments to explain expected large EPAct tax deductions and credits.
13. Celebrate tax-enhanced energy-efficient warehouse achievement
U.S. furniture industry supply chain structures are ideally located for LED lighting particularly in showrooms and integrated warehouse show rooms. Since EPAct tax savings relates to square footage, the industrys large facilities excursion large tax deductions. The required warehouses are typically large, flat roof structures that are ideal for solar P.V. Achieving energy reduction enhanced with tax savings will help this very competitive industry accelerate its recovery concurrently with overall economic recovery.